Einbau eines Stabilisator an der Hinterachse

Hola Fernando,

I do not have a stabi in my Fuso, but I think I will possibly need one because it has a pretty big box.

But in Germany this thing is really expensive, I'm thinking about to order it here in Spain, or possibly find a used one from a dealer of used car parts.

But I will wait until my new suspension is finished and then test first. Then I will see if I need one.

If you want a stabi there are not many opions I think.

My information up to now is:

There is no one available  exactly for the 6C18 (4x4). But you can use one from the normal 4x2. But not from a small one, but from the 7,5 to version (7C18).

In case you have a rised suspension you must lengthen the vertical rods (cut them apart, push the ends into a matching tube, weld it to the right length).

At least in Germany, it is not possible to order the complete stabi just with 1 article number. Instead, your dealer has to select all needed single componets together and order them each seperately. I have attached a file with the numbers. 

I hope this will help. 

Peter

Hi Peter

thank so much, I’ve been researching a good while and wasnt sure which model was compatible 

Peter sagt
Hola Fernando,

I do not have a stabi in my Fuso, but I think I will possibly need one because it has a pretty big box.

But in Germany this thing is really expensive, I'm thinking about to order it here in Spain, or possibly find a used one from a dealer of used car parts.

But I will wait until my new suspension is finished and then test first. Then I will see if I need one.

If you want a stabi there are not many opions I think.

My information up to now is:

There is no one available  exactly for the 6C18 (4x4). But you can use one from the normal 4x2. But not from a small one, but from the 7,5 to version (7C18).

In case you have a rised suspension you must lengthen the vertical rods (cut them apart, push the ends into a matching tube, weld it to the right length).

At least in Germany, it is not possible to order the complete stabi just with 1 article number. Instead, your dealer has to select all needed single componets together and order them each seperately. I have attached a file with the numbers. 

I hope this will help. 

Peter

  

Hi Peter,
I've been scouring the secondhand market, and almost no one can clarify whether the product they have is a Fuso 7.5-ton.
I found this one that looks great and is in very good condition for about 300 euros, but it's more of the same.
Is there a specific measurement, like bar width, etc., that would help?

imagen adjunta

Hi Fernando, 

I'm sorry, but I cannot help you with this. I have no idea about any dimensions.  

Good evening, colleagues.
After researching measurements and dimensions to find the most appropriate stabilizer bar for the 4x2 models, I see that the one that best fits our model is the Fuso 1217 4x2.